Novachip-Plus 22mm pre-routed chipboard

In stock
SKU
ncp-22
Regular Price £39.54 Incl. Vat: Special Price £35.94 £29.95

NovaTherm™ NovaChip PLUS - Foil Faced Grooved P5 MR
Chipboard 1200 x 600 x 22mm, 4 Grooves @ 150mm
centres + radius returns @ both ends for 12mm O.D pipe.

Delivery time 3-5 days

We found other products you might like!

Features:

  • 22mm Flooring Grade Tongue & Groove Interlocking Chipboard Panels for 12mm Pipe
  • Floor Board & Underfloor Heating Combined Panel

Specification:

  • Each Board: 4 Grooves at 150mm Centres for 12mm Pipe
  • Dimensions: Width 600mm, Length: 1200mm, Height: 22mm
  • Board Coverage: 0.72m²

 

  • Please note; the Novachip Plus 22mm grooved chipboard flooring must be covered with a minimum of a 6mm flooring grade plywood or a cement board. This will ensure your floor finish is laid to a structurally sound and level substrate which can withstand floating engineered/laminate, LVT (Vinyl and Linoleum), Low tog Carpets and Tiles.

Delivery time 3-5 days

N.B. PLEASE ALLOW 3-5 DAYS FOR DELIVERY

Before installation, the moisture content of the Novachip boards
should be stabilised close to the conditions of use. The boards
should be stabilized for 5−7 days, depending on the initial
moisture content. The boards should be separated with battens
whilst being stabilised.

The boards should always be glued to each other at the tongue and the
groove. The boards can also be glued to the base to avoid possible
creaking. The glue should be an appropriate PVA wood glue. Application
of the glue should be done carefully ensuring that there is a continuous
seam of adhesive along the entire length of the tongue and groove. Note
however that excessive use of glue might lead to gaps between the boards.
Before installing the boards, check that the base is even and straight. Also
make sure, that the edges of any boards next to walls and pillars are
supported.

Novachip boards should be screwed to the base with screws
suitable for screwing wood. The screws should be countersunk
screws 50−75mm in length. The screws are attached to the
middle and the edges of the boards 300−450mm apart.